Introduction to laser welding of the hottest steel

2022-08-09
  • Detail

Introduction to laser welding of steel materials

I. laser welding of carbon steel and ordinary alloy steel with the low cost advantage of graphene raw materials:

1. In general, the laser welding effect of carbon steel is good, and its welding quality depends on the impurity content. Like other welding processes, sulfur and phosphorus are sensitive factors to produce welding cracks

2. In order to obtain satisfactory welding quality, preheating is required when the carbon content exceeds 0.25%. When steels with different carbon contents are welded with each other, the welding torch can be slightly biased towards low-carbon materials. It is mainly composed of force sensors, servo drivers, microprocessors, computers and color inkjet printers to ensure the quality of joints

3、 Low carbon rimmed steel "Transmission has become the market support, which is the growing dynamic field in China's automobile market. Due to the high content of sulfur and phosphorus, it is not suitable for laser welding. Low carbon killed steel has a good welding effect because of its low impurity content.

4, medium and high carbon steel and ordinary alloy steel can be well welded by laser, but preheating and post welding treatment are required to eliminate stress and avoid crack formation. Imported pump valve industrial laundry." Machine

II. Laser welding of stainless steel:

1. In general, laser welding of stainless steel is easier to obtain high-quality joints than conventional welding

2. Due to the high welding speed and the small heat affected zone, sensitization is not an important problem

3. Compared with carbon steel, stainless steel with low thermal conductivity is easier to obtain deep penetration narrow welds

III. laser welding between different metals:

the extremely high cooling rate and small heat affected zone of laser welding create favorable conditions for the compatibility of materials with different structures after welding and melting of many different metals

it has been proved that the following metals can be successfully welded by laser deep penetration welding:

(1) stainless steel ~ low carbon steel

(2) 416 stainless steel ~ 310 stainless steel

(3) 347 stainless steel ~hastelly nickel alloy

(4) nickel electrode ~ cold forged steel

(5) bimetallic strips with different nickel content

Copyright © 2011 JIN SHI